1063824609.jpg 718250658.jpg 1052576710.jpg 1767078590.jpg 386129145.jpg

Contact info

Website:http://www.gs-smt.com

 ATTN: LI YI
QQ: 1327576703
SKYPE: gs-smt-liyi@hotmail.com
TEL:0755-27962186
FAX:0755-27678283
Email: sales@gs-smt.com

SMT Nozzle Cleaner SMT Nozzle Cleaning Machine GS-0805

 

Model GS-0805
Weight Around 70KG
Total power 250W
Power supply AC220V±10% 50/60Hz
Size L520*W550*H456(mm)
Air pressure 0.5 - 0.6MPa (during operation)

More details

contact us

  • More info

Equipment advantages

1.Reduce the purchase cost of nozzle; After using SMT automatic nozzle cleaning machine, it can solve the problem that the nozzle is too dirty and scrapped, so as to prolong the service life.

2.Reduce unnecessary labor; Because the machine adopts full-automatic cleaning, there is no need for special personnel to be responsible, and the whole process is completed automatically by the machine.

3.Effectively reduce the defective rate of products and improve the productivity of SMT; A large part of the production process is due to the uneven surface of the nozzle and the excessive dirt of the inner cavity, resulting in the throwing or mounting displacement, resulting in the poor welding of the subsequent sequence. After using the cleaning machine, the nozzle can always protect the new state and greatly improve the production efficiency.

4.Completely solve the dirt and impurities that are difficult to be cleaned by ultrasonic; It will not be unclean due to the smaller and smaller aperture of the nozzle.

5.Do not need to use chemical solvents. Clean with environmentally friendly deionized water or distilled water.

6.Simple and convenient operation, automatic continuous cleaning and automatic drying.

7.Meet the trend of industry 4.0 and SMT production line, with intelligence, fewer people and efficiency.

 

Comparison with traditional cleaning

     1.Manual air gun

     ① The efficiency of manual cleaning is low, the surface and lumen of the nozzle cannot be cleaned, and the inner hole is easy to be damaged by steel wire poke.

     ② Large difference in cleaning effect.

     ③ The use of cleaning fluid and alcohol may penetrate and cause the reflective layer to fall off.

     2.Ultrasonic cleaning

     ① Low cost and high efficiency;

     ② It is easy to cause collision between nozzles during cleaning, resulting in damage or falling off of black coating on the surface.

    ③ The cleaning fluid causes damage to the surface coating of the nozzle and greatly shortens the service life of the nozzle.

     ④ Unable to completely clean the surface and lumen of the nozzle.

    ⑤ For the new 0201 nozzle can not be cleaned well, mainly because the inner hole of the nozzle is too small, vacuum bubbles can not be discharged during ultrasonic cleaning, and the cleaning  is not clean.

 

Multifunctional, humanized and good design

1.The machine adopts Taiwan Weilun touch screen man-machine interface and PLC control.

2.The pneumatic part uses all imported SMC pneumatic components from Japan to better ensure stable and efficient work efficiency.

3.All key parts of the whole machine are made of 304 stainless steel imported from Japan, and special parts are made of 316 stainless steel imported from Japan, so as to ensure that the whole machine will not rust due to the use of water, which will affect the service life of the equipment and other potential safety hazards.

 

Main functions and features

1.Thoroughly solve the dirt and impurities that are difficult to be cleaned by ultrasonic.

2.It will not be unclean due to the smaller and smaller aperture of the nozzle.

3.More thorough cleaning can directly prolong the service life of the nozzle.

4.No damage to the surface coating and reflection plate of the nozzle.

5.Use environment-friendly deionized water or distilled water for cleaning.

6.Automatic continuous cleaning and automatic drying.

7.More simple and convenient operation.

8.Suitable for all kinds of mounter.

 

Economic performance

1.Reduce the purchase cost of nozzle;

The use of dez-c716 automatic  nozzle cleaning machine can well solve the problem that the  nozzle is too dirty and scrapped, so as to prolong the service life.

2.Reduce unnecessary labor;

Because the machine adopts full-automatic cleaning, there is no need for special personnel to be responsible, and the whole process is completed automatically by the machine.

3.Effectively reduce the defective rate of products and improve the productivity of SMT;

A large part of the production process is due to the uneven surface of the  nozzle and the excessive dirt of the inner cavity, resulting in the throwing or mounting displacement, resulting in the  poor welding of the subsequent sequence. After using the cleaning machine, the  nozzle can always protect the new state and greatly improve the production efficiency.

 

Parameter

Complete machine status

Size

L520*W550*H456(mm)

Weight

Around 70kg

Power supply

AC220V±10% 50/60Hz

Total power

250W

Control mode

Touch screen+PLC

Gas source correlation

Air source

Pure compressed air

Air pressure

0.5 - 0.6MPa during daily operation

Injection pressure

0.4 MPa

Air consumption

below 280nl / min

Other specifications

Liquid type

Industrial deionized water or distilled water

Liquid consumption

300cc/h

Liquid storage capacity

1200cc

Power

AC220~240V

Environmental conditions

0~55(No frost)

Power consumption

<0.1KW

Nozzle tray specification

4 nozzles in a single row, 40 nozzles in 10 rows by default

Specification of nozzle

All type of nozzle