Cutting Machine-505 Automatic Knife Type Machine

 

We mainly sales FPC punching cutting machine, LED cutting machine, PCB circuit board cutting machine, aluminum board cutting machine, lamp strip cutting machine, circuit board cutting machine, pneumatic type cutting machine, feeding mode machine, automatic curve V-CUT, PCB/FPC punching mould and so on, which are mainly used in mobile phone, household appliances, lighting and a variety of soft and hard PCB board in other related electronic industry, lamp, lamp belt, aluminum plate and other high-end electronic equipment. We aim at improving productivity, reducing costs and improving the quality of the products.

Advantage

After soldering , it is easy to hurt the circuit or electronic elements on the joint panel when separating. The upper circular blade moves to separate the board , which reduces cutting press in case of the damage of components and welding spot and improves the efficiency and quality.

Features

1. The circular blade moves horizontally and the straight knife moves up and down to cut the board with the PCB staying , thus the electronic elements won't be damaged.

2. With microcomputer technology , the program can control the cutting schedule and cutting times with storage of up to 100 groups of data. This machine is suitable for width from 58 mm to 220 mm of board.

3. The gap between the upper and lower blade is adjustable , from 0 mm to 15 mm.

4. The straight blade moves up and down , which is available to cut double-sided board.

5. The cutting press is small to avoid solder crack.

6. The manual switch controls the cutting speed of 1 cut/s.

7. No need to feeding boards manually with high-tech device , there are reserved port for external robotic hand.

8. Using air press from 4 to 5 Pa , no demand for specific working place , wipe its surface with rust-proof oil for the maintenance.

9. The productivity is visible due to the auto counter performance.

10. With safety device of Omron infrared light sensor , the machine stops operation when it senses the hand or foreign matter in the moving zone of the blade.

11. With step motor , the machine locks by itself and positioning accurately when in an energized state.

12. When the solder panel with many pieces of boards is separated , it is easy to hurt the elements or the circuit. While this is machine available to avoid the damages and improve working efficiency and quality.

13. After cutting the PCB , the boards can be transferred directly to the inspection line through the conveyor belt.