Automatic high efficiency nozzle cleaning machine GS-0801

 

Machine installation and adjustment

Warning：

1.This equipment can only be operated by professional maintenance and repair personnel or trained qualified personnel.

2.Before power on, it shall be determined that the external input power supply is consistent with the rated voltage and current of the equipment.

3.This equipment contains high-voltage device and mechanical transmission. Pay attention to personal safety during operation.

4.The cleaning fluid used for this equipment is pure water (HP value 5-7 soft water), and solvent liquids are strictly prohibited.

5.The compressed air used in this equipment is pure gas, and unfiltered gas is strictly prohibited.

6.Do not scratch or strike the touch screen with sharp objects by gravity.

Working environment and conditions

1. The equipment shall be placed on the ground or flat desktop in a dry and ventilated plant.

2. The working environment temperature shall be between 5 ℃ and 45 ℃.

3. The humidity of the working environment shall be between 20% and 95%.

4. Power requirements: apply the voltage according to the factory instructions of the equipment.

5. Use purified 0.5 to 0.6MPa industrial gas source (during operation).

Precautions for adding water

1. Please use purified water (HP value 5-7 soft water).

2. It is forbidden to open the cover of water injection port and add water when the equipment is running; Add water after stopping the equipment.

3. When filling water, pay attention to the prompt or audible warning on the display. The display will pop up after fillingThe buzzer will sound three times when the water is added. Stop adding water immediately after hearing the prompt.

4. When filling water, pay attention to the water inlet to prevent excessive overflow and damage to the electrical appliances in the machine.